ESAB Rebel EMP 285ic Portable Multi-Process Welder — 120/230 Volts, 300 Amp Output, Model# 0558102555
$2,988.00
(In Stock)
The ESAB® Rebel™ EMP 285ic Portable Multi-Process Welder is a powerful, single-phase welding system that features MIG, Flux-Cored, TIG and Stick welding capabilities. Designed to run the full range of 0.045in. (1.2mm) wire, short arc and spray transfer, with increased deposition rates and higher productivity on smaller diameter wires such as 0.030in. (0.8mm) and 0.035in. (0.9mm). Package includes welding cart, MIG gun, electrode holder, Argon flow gauge regulator, ground clamp with leads, plus a variety of other accessories.
What’s Included
- (1) Welder power supply
- (1) Welding cart
- (1) MIG gun
- (1) Electrode holder
- (1) 10ft. ground clamp with leads
- (1) Argon flow gauge regulator with 12.5ft. gas hose
- (10) 7018 stick electrodes
- (1) 10-lb. spool of MIG wire
- (1) Nozzle
- (1) Diffuser
- (2) Contact tips
- (1) Drive roll kit
- (1) Material thickness guide
- (1) Conduit liner
- (1) 120V plug
- (1) 230V plug
Product ManualKey Specs
Item# | 111872 |
Brand | ESAB |
Manufacturer’s Warranty | 3 Yr Consumer Limited |
Ship Weight | 176.0 lbs |
Multi-process | Yes |
Volts | 120/230 |
Amps | 300 |
Mig Ready | Yes |
Spoolgun Included | No |
Cart Included | Yes |
Duty Cycle | MIG: 40% at 285A, Stick: 40% at 260A, TIG: 40% at 285A |
Max. Weld Thickness | 1/2 in |
Max. Welding Wire Diameter | 0.060 in |
Min. Output Amps | 5 |
Max. Output Amps | 300 |
Wire Feed Speed Control | Yes |
Power Cord Length | 10 ft |
Clamp Cable Length | 10 ft |
Regulator and Gas Hose Included | Yes |
Shielding Gas Required | Yes |
Product Weight | 70 lb |
Dimensions L x W x H (in.) | 26.5 x 11.5 x 19.5 in |